Plinths

An optional choice of plinth arrangements to suit all applications

Plinth Kit Four corner plates (factory fitted if specified with order) fit to underside of base frame providing access on all sides by fitting castors and/or jacking feet which raise the cabinet by a nominal 104mm. 4 trim plates neatly infill the gap between base frame and floor (when 'baying cabinets' order separate additional 'infill plates' - see table below).
PRODUCT CODE   DESCRIPTION Price   KD-120   600 X 675 Plinth kit for Kudos cabinet £38.00    KD-125   600 X 875 Plinth kit for Kudos cabinet £40.00    KD-126   600 X 915 Plinth kit for Kudos cabinet £42.00    KD-326   600 X 1000 Plinth kit for Kudos cabinet £50.00    KD-327   600 X 1200 Plinth kit for Kudos cabinet £52.00    KD-130   800 X 675 Plinth kit for Kudos cabinet £40.00    KD-135   800 X 875 Plinth kit for Kudos cabinet £45.00    KD-127   800 X 915 Plinth kit for Kudos cabinet £48.00    KD-328   800 X 1000 Plinth kit for Kudos cabinet £55.00    KD-329   800 X 1200 Plinth kit for Kudos cabinet £57.00
N.B. Plinth kit must be used with castors and/or jacking feet - order separately.
Castors Fit to 'plinth kit' or 'adaptor plate' (order separately). Castors increase overall cabinet height by 104mm. Maximum load bearing per castor is 350kg.
PRODUCT CODE   DESCRIPTION Price   KD-090   Castors, Set Of Four £28.00
Jacking feet Level and stabilise cabinets on uneven floors. Fit directly to 'plinth kit' or 'adaptor plates' (order separately).
PRODUCT CODE   DESCRIPTION Price   KD-110   Jacking Feet, Set Of Four £7.00
Adaptor plate Fit to each corner in underside of the base of the cabinet (factory fitted if specified with order) to enable acceptance of either a Castor or Jacking Foot as preferred (order separately).
PRODUCT CODE   DESCRIPTION Price   KD-115   Adapter Plate, Set Of Four £15.00  Adapter plate required for jacking feet/castors if plinth not ordered
Stabilising Plinth A fully retractable plinth for 600mm and 800mm mm wide Kudos cabinets. Prevents tipping when heavey equipment is fully extended on telescopic shelves. Kit comprises plinth corners, one pair of slides, pull out front panel, trim plates and six adjustable jacking feet.
PRODUCT CODE   DESCRIPTION Price   KD-435   Stabilising Plinth 600mm X 675mm £106.00    KD-436   Stabilising Plinth 600mm X 875mm £108.00    KD-128   Stabilising Plinth 600mm X 915mm £111.00    KD-437   Stabilising Plinth 800mm X 675mm £108.00    KD-438   Stabilising Plinth 800mm X 875mm £111.00    KD-129   Stabilising Plinth 800mm X 915mm £115.00
Comms Room 'Raised Floor Plinth' Keyzone have developed a unique plinth system that can be fitted to a normal raised floor and fits into the aperture of 1 x 600mm floor tile depthwise. The number of tiles on the width is variable and depends on the number of racks per plinth. The benefit is that, as the plinth is slightly raised the adjacent tiles to the front or rear of the rack can be easily removed when the racks are fully loaded in situ. ... Call for details